Overview of High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications

High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications is precision-manufactured from 99% aluminum oxide (Al₂O₃), delivering exceptional thermal stability and mechanical properties. These rods maintain structural integrity in extreme environments up to 1800°C, making them perfect for demanding industrial and research applications.

With outstanding resistance to wear, corrosion and thermal shock, alumina rods are widely used in high-temperature fixtures, sensor components, semiconductor equipment, and laboratory apparatus.

Key Features of High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications

Extreme Temperature Resistance – Continuous operation up to 1800°C

Superior Mechanical Strength – High hardness and wear resistance

Excellent Thermal Shock Resistance – Withstands rapid temperature changes

Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis and corrosive environments

Precision Dimensions – Tight tolerances for critical applications

(High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications)

Specification of High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications

These alumina ceramic plates handle tough dewatering jobs in mining. They push water out of mineral concentrates and tailings slurry. You need reliable, long-lasting parts for this. These plates deliver exactly that.

The material is high-purity alumina ceramic. Typical grades are 92% or 95% alumina. This makes the plates extremely hard. They resist wear far better than steel or polymer liners. Think ten times longer life or more in harsh slurry flows. This hardness fights off abrasive particles constantly hitting the surface.

Density is high, around 3.6 g/cm³. This gives the plates good strength. They withstand significant pressure in dewatering presses and filters. They won’t crack or chip easily under normal operating loads. Their flexural strength is strong enough for industrial demands.

Wear resistance is the key benefit. Measured by standard tests, the alumina surface loses very little material even after heavy use. This keeps the plate surface smooth over time. A smooth surface is vital. It allows filter cloths to release the dewatered cake cleanly. It prevents cloth blinding and keeps water flow rates high. Consistent performance means fewer shutdowns for maintenance.

Surface finish is controlled. Plates are fired precisely. They come out flat and even. The surface roughness is kept low. This minimizes friction and wear on filter cloths. It helps the cloth last longer too. Different finishes are available for specific filter types.

Common sizes match standard filter press dimensions. Plates are often square or rectangular. Thickness ranges from 10mm to 30mm or more. Custom shapes and thicknesses are possible. Bolt holes or other mounting features are machined accurately. This ensures easy installation and a tight fit in the filter press frame.

These plates work in vacuum filters, pressure filters, and belt presses. They handle iron ore, copper, coal, gold tailings, and other mining slurries. Their extreme wear resistance cuts replacement costs significantly. They keep your dewatering process running efficiently for longer periods between changes.

(High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications)

Applications of High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications

Mining operations need to remove water from mineral slurries. This step is vital. Alumina ceramic plates offer a strong solution. They are very hard. This hardness fights off wear from abrasive particles in the slurry. Steel parts wear out quickly. Ceramic plates last much longer. This reduces downtime for replacements. It lowers maintenance costs too.

These plates handle tough chemicals well. Mining slurries often contain acids or alkalis. Ceramic plates resist chemical attack. They don’t corrode like metal parts. This means consistent performance over time. Their smooth surface also helps. Slurry flows easily over it. This prevents material buildup. Blockages are less likely. Equipment runs smoother.

High efficiency alumina plates work in several key dewatering areas. They are ideal for cyclone liners. Cyclones use high-speed spinning to separate solids and water. Abrasion is extreme here. Ceramic liners withstand this harsh environment. They protect the cyclone body. This extends the cyclone’s working life significantly.

These plates are also perfect for wear tiles. Wear tiles shield critical equipment surfaces. They cover areas like pump housings or pipeline bends. These spots face constant particle impact. Ceramic tiles absorb this impact. They shield the underlying metal. This prevents costly damage. Equipment lasts longer between repairs.

Screens are another important application. Dewatering screens separate solids from liquids. Feed points and discharge areas suffer heavy wear. Lining these zones with alumina ceramic plates protects the screens. It maintains screening efficiency. It keeps the process running reliably.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications

High Efficiency Alumina Ceramic Plate: Mining Dewatering FAQs

What makes these plates good for mining dewatering?
Mining dewatering handles abrasive slurries. These plates are incredibly hard. They resist wear much longer than steel. This reduces downtime. It saves money on replacements. They keep equipment running longer.

How tough are they against chemicals?
Dewatering often uses harsh chemicals. Alumina ceramic is very stable. It doesn’t react easily with acids or alkalis. Your plates won’t corrode. They maintain performance in tough chemical conditions.

Can they handle high pressure?
Yes. These plates are very strong. They are designed for high-pressure environments common in dewatering equipment. They won’t crack or break easily under stress. This ensures reliable operation.

How are the plates installed?
Installation is usually straightforward. They often bolt directly onto existing equipment. Rubber backing helps absorb impact. This makes replacing worn steel parts simple. You get the ceramic benefits without major machine changes.

Are they really cost-effective?
Absolutely. The upfront cost is higher than steel. But the key is lifespan. They last many times longer. You replace them far less often. You save on maintenance costs. You avoid expensive production stops. The long-term savings are significant.

(High Efficiency Alumina Ceramic Plate For Mining Dewatering Applications)