Overview of High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft

High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft is precision-manufactured from 99% aluminum oxide (Al₂O₃), delivering exceptional thermal stability and mechanical properties. These rods maintain structural integrity in extreme environments up to 1800°C, making them perfect for demanding industrial and research applications.

With outstanding resistance to wear, corrosion and thermal shock, alumina rods are widely used in high-temperature fixtures, sensor components, semiconductor equipment, and laboratory apparatus.

Key Features of High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft

Extreme Temperature Resistance – Continuous operation up to 1800°C

Superior Mechanical Strength – High hardness and wear resistance

Excellent Thermal Shock Resistance – Withstands rapid temperature changes

Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis and corrosive environments

Precision Dimensions – Tight tolerances for critical applications

(High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft)

Specification of High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft

Right here’s the requirements material for high purity alumina ceramic rods:

These rods are made from high purity aluminum oxide (Al2O3). We provide sizes of 2mm, 3mm, and 5mm. The product pureness is constantly over 99%. This guarantees outstanding performance. The rods are sintered specifically. This creates a thick, fine-grained framework.

Alumina ceramic is extremely hard. It determines around 9 on the Mohs range. This firmness provides impressive wear resistance. The rods keep dimensional stability under lots. They stand up to contortion well. Alumina has high compressive toughness. These poles can take care of significant stress. They appropriate for demanding mechanical applications.

The product supplies excellent thermal residential properties. It withstands very heats. Continual use up to 1600 ° C is feasible. Thermal shock resistance is good. Abrupt temperature level modifications create much less breaking. The rods have low thermal expansion. Dimension adjustments are very little with warm.

Electrical insulation is a vital feature. Alumina ceramic is an outstanding insulator. It functions well also at elevated temperature levels. The surface area is extremely smooth. Very little completing is needed after sintering. The rods are ready for accuracy setting up. Surface area finish decreases rubbing in moving components.

Chemical inertness is fundamental. The poles stand up to most acids and alkalis. Deterioration is not a trouble. They carry out accurately in severe environments. Moisture absorption is near absolutely no. Feature remain regular gradually. These poles are suitable for shafts, pins, and overviews. They operate in pumps, valves, and tools. They supply long life span.

(High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft)

Applications of High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft

These precision alumina ceramic rods been available in 2mm, 3mm, and 5mm sizes. They are ideal for requiring shaft applications. High purity Al2O3 uses phenomenal firmness. This makes the rods unbelievably wear-resistant. They last much longer than metal shafts in rough conditions. Believe sand, grit, or slurry. The surface stays smooth.

These rods resist chemical attack effectively. Acids and bases do not harm them conveniently. This is essential for chemical handling tools. It’s crucial for pumps managing destructive fluids. Food and pharmaceutical applications profit too. The product will not pollute products. It satisfies strict health requirements.

Alumina ceramic is an excellent electric insulator. Shafts made from it won’t conduct electrical energy. This prevents short circuits. It’s crucial in electric gadgets. Semiconductor manufacturing uses them consequently. They take care of high voltages safely.

The product takes care of severe heat. It won’t warp or soften at heats. Furnace elements make use of these shafts. High-temperature sensors rely upon them. Thermal stability is assured. Low thermal development keeps measurements accurate.

These rods are lightweight. They lower inertia in moving parts. This improves effectiveness in high-speed equipment. Precision instruments need this. Metering devices use them for precision.

Friction is reduced with alumina. This reduces energy loss. Bearings and seals perform much better. Lubrication needs decrease. This streamlines maintenance.

The rods are dimensionally secure. They hold tight resistances under tons. This makes certain reliable operation. Precision positioning stays consistent. Optical equipment utilizes them. Laser systems rely on their stability.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft

High Purity Alumina Ceramic Rods for Shafts: Your Top 5 Questions Answered

People often ask about using our high purity Al2O3 alumina ceramic rods for shafts. Here are the top five questions we get:

1. Why use alumina ceramic for a shaft?
Alumina ceramic is very hard. It resists wear much better than metal. This is important for shafts moving a lot. It handles heat well too. It won’t bend or weaken in high temperatures like some metals. It also fights corrosion. Chemicals and water won’t damage it easily.

2. How strong are these ceramic rods?
Our rods are very strong. They are made from high purity alumina. This makes them dense and tough. They handle heavy loads well. They resist breaking under pressure. Their strength is reliable for demanding jobs. But remember, ceramic is brittle. Avoid sharp impacts or bending them too much.

3. Can these rods handle high heat?
Yes, they handle high heat very well. Alumina ceramic keeps its strength even above 1500°C. It doesn’t melt easily. It won’t expand much with heat either. This makes them stable for hot environments. Metal shafts often fail or warp in these conditions.

4. Is friction a problem with ceramic shafts?
Alumina ceramic has a smooth surface. This creates low friction. Moving parts slide easily against it. Less friction means less wear and heat. It also means you might need less lubrication. This is good for sensitive equipment.

5. Can I get custom sizes or finishes?
Yes, we offer custom options. Our standard rods are 2mm, 3mm, and 5mm diameters. We can make other diameters too. We can also provide specific lengths. Surface finishes can be adjusted. We can make them smoother or give them a specific roughness. Tell us your needs. We can usually meet them.

(High Purity 2mm 3mm 5mm Al2o3 Alumina Ceramic Rod for Shaft)