Overview of OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts

OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts is manufactured from 99%+ pure aluminum oxide (Al₂O₃), delivering exceptional mechanical strength and thermal stability. These advanced ceramic parts maintain dimensional stability in extreme environments up to 1800°C, making them perfect for demanding applications in semiconductor equipment, aerospace components, chemical processing, and high-temperature industrial machinery.

Features of OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts

Ultra-High Temperature Resistance – Withstands continuous operation up to 1800°C

Exceptional Mechanical Strength – Superior hardness and wear resistance compared to metals

Corrosion & Chemical Proof – Resists acids, alkalis, and harsh industrial chemicals

Electrical Insulation – Excellent dielectric properties for electronic applications

Customizable Designs – Available in complex geometries with tight tolerances (±0.01mm)

(OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts)

Specification of OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts

Below’s the specification content for those alumina ceramic components:

Our OEM high-purity alumina ceramics supply exceptional efficiency for requiring commercial uses. These components stand up to severe warmth and severe settings accurately. We offer three key pureness qualities: 95%, 96%, and 99% Al2O3. Higher purity normally means far better performance. The 99% quality supplies the maximum resistance to wear and deterioration. It takes care of the highest possible temperatures easily. The 95% and 96% grades offer a strong equilibrium of performance and value. They are outstanding for lots of challenging applications.

These alumina components are incredibly difficult. They stand up to abrasion incredibly well. Their surfaces stay smooth under rubbing. This firmness makes them last much longer than metal parts. They likewise supply exceptional electric insulation. This is vital in high-voltage or electronic setups. Heat does not easily go through them either. They function as efficient thermal obstacles. Chemical attack is hardly ever an issue. Acids and alkalis cause little damages. This chemical inertness is a major benefit.

Alumina porcelains maintain their strength at very heats. They will not melt or deform easily. This security is essential inside heating systems or engines. You discover them in semiconductor manufacturing tools. They are important in furnace linings and warmth therapy fixtures. They work well as electrical insulators in spark plugs and sensors. Numerous wear components utilize alumina for long life. These include pump seals, cutting devices, and bearing components. They are also common in chemical handling plants.

We device these ceramics specifically to your drawings. Facility forms and tight tolerances are possible. Our processes guarantee dimensional accuracy. We can create structural components, shielding components, and specialized wear components. These ceramics are ideal substitutes for metal components that fall short under heat or corrosion. They help devices run longer with much less downtime. Integrity is the crucial benefit. We supply parts in all 3 pureness degrees: 95%, 96%, and 99% Al2O3. The appropriate quality relies on your particular temperature, wear, and chemical exposure needs.

(OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts)

Applications of OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts

These precision alumina ceramics contain high percentages of light weight aluminum oxide. They are extremely difficult and sturdy. They stand up to extreme warm remarkably well. This makes them excellent for challenging industrial tasks needing trusted parts under extreme conditions.

Makers offer different pureness levels: 95%, 96%, and 99% Al2O3. Higher purity usually means far better performance. It suggests higher solidity, stronger resistance to use, and far better electric insulation. The 99% quality holds up against the highest possible temperature levels and is strongest. It takes care of temperature levels over 1600 ° C easily. The 95% and 96% grades are really strong too. They function well for lots of demanding applications at lower cost.

These ceramics are electric insulators. They do not carry out electrical power well. This is essential in electronic devices and high-voltage devices. They keep electrical power flowing safely where it should. They prevent dangerous shorts.

Their warmth resistance is vital. They are made use of inside heating systems and kilns. They end up being heater cellular linings, kiln furnishings setters, and thermocouple security tubes. They take care of the direct flame and hot gases without damaging down. Heat shields and burner nozzles additionally utilize them.

They are very put on resistant. They last a long time in rough environments. They benefit pump seals, valve seats, and put on plates. They deal with grinding and constant rubbing better than lots of metals.

Their chemical security is an additional plus. They stand up to strike from numerous acids and antacids. This makes them ideal for chemical processing devices. Components like labware, activator liners, and blending blades advantage.

You find these alumina parts in lots of markets. Semiconductor producing uses them for wafer handling. The automobile industry uses them in sensing units and wear parts. Aerospace uses them for heat-critical components. Clinical tools utilize them for biocompatible implants. Shops and steel handling rely upon them heavily. They are necessary for thermal management and architectural support in extreme setups. These ceramics provide a dependable solution.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts

What material are these parts?
These parts use alumina ceramic. Common grades are 95%, 96%, and 99% pure Al2O3. Higher purity means better performance. This material is very hard. It resists wear extremely well. It handles chemicals without damage.

How hot can these parts get?
These parts work well in extreme heat. They reliably handle temperatures over 1500°C. Exact limits depend on the specific grade. The 99% Al2O3 usually handles the highest heat. Design matters too. The shape and thickness affect performance.

Do these parts conduct electricity?
No. Alumina ceramic is an excellent electrical insulator. This property stays strong even at very high temperatures. It prevents electrical current flow. This makes it safe for electrical applications. It protects sensitive components.

Can you make complex shapes precisely?
Yes. We specialize in precision manufacturing. We produce complex, fine-tolerance parts. We use advanced forming and sintering techniques. This ensures dimensions are exact. This precision is vital for fitting into industrial machinery.

Where are these parts typically used?
These parts are essential in demanding industries. Common uses include furnace linings and heating elements. They work in semiconductor processing equipment. They are found in laser tubes and sensor housings. They serve in wear-resistant components. They perform where metals fail.

(OEM High-Temperature 95% 96% 99% Al2O3 Alumina Fine Precision Ceramics Insulating Structural Industrial Parts)