Overview of High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft

High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft is precision-engineered from 99%+ pure aluminum oxide (Al₂O₃), offering outstanding mechanical strength and thermal stability. With a maximum operating temperature of 1800°C, these rings are widely used in high-wear applications such as bearings, seals, insulators, and semiconductor processing equipment. Their exceptional hardness and corrosion resistance make them ideal for demanding industrial environments.

Key Features of High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft

Extreme Temperature Resistance – Stable up to 1800°C with minimal thermal expansion

Superior Wear Resistance – Harder than steel, ensuring long service life

Excellent Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis, and corrosive gases

Precision Machined – Tight tolerances for consistent performance in mechanical assemblies

(High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft)

Specifications of High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft

High purity alumina ceramic poles come as strong bars or shafts. They use outstanding performance popular settings. These rods exist in two purity degrees. You can pick 95% alumina ceramic or 99% alumina ceramic. The greater purity generally means much better efficiency. Both types offer challenging commercial work well.

These ceramic rods are very hard. They resist wear efficiently. They also handle high warmth very well. Expect trustworthy operation approximately 1700 ° C. This makes them best for heating system parts. They function well in kiln furniture as well. Thermal shock resistance is strong. The rods manage fast temperature changes without breaking. This is vital for several processes.

Electrical insulation homes are great. Alumina ceramic is a strong dielectric material. This matches electronics and electric applications. Chemical resistance is another essential attribute. The rods stand up to several destructive chemicals. Acids and bases normally trigger no damages. This is essential for chemical handling devices.

Usual dimensions are readily available. Diameters usually vary from 1mm to 50mm. Sizes normally increase to 500mm. Custom-made dimensions are feasible too. Manufacturers can reduce rods to your certain demands. Surface area coatings can vary. Options consist of as-fired, ground, or brightened. The selection depends upon your application requires.

These poles are extremely versatile. Use them for thermocouple protection tubes. They make excellent insulators. Heat bearings commonly use them. Use components gain from their solidity. They support sensor probes reliably. Semiconductor handling tools relies on them. Laboratory equipment regularly includes these poles.

(High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft)

Applications of High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft

These solid alumina ceramic rods come in 95% and 99% purity grades. They are incredibly hard and resist wear exceptionally well. This makes them perfect for demanding mechanical jobs. They handle extreme heat without changing shape. This thermal stability is vital for high-temperature processes. They won’t rust or corrode, even facing harsh chemicals. This chemical inertness suits tough environments. They also block electricity effectively, acting as strong insulators.

Semiconductor makers use these rods constantly. They hold silicon wafers during etching and diffusion steps. Their purity prevents contamination. Furnace builders rely on them for thermocouple protection tubes and support structures. They last long under intense heat. Laboratories use them for stirrers and sample holders. Their chemical resistance keeps experiments clean.

Medical device producers need their biocompatibility. They work well in body fluid contact situations. Industrial settings use them as wear-resistant guides, shafts, and rollers. In steel mills, they guide hot wires. In textile plants, they guide abrasive threads. Their hardness stops premature wear. Electrical applications use them as insulating standoffs and bushings. They safely manage high voltages.

The choice between 95% and 99% purity depends on the job. 99% alumina offers higher hardness and better chemical resistance. It handles more extreme temperatures. Use it for critical semiconductor tools or severe furnace conditions. 95% alumina provides good performance at a lower cost. It works well for many wear parts and general industrial uses. Remember, alumina ceramic is brittle. Avoid sharp impacts or uneven stress points. Proper installation prevents breakage.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft

People often ask these questions about our high purity alumina ceramic rods. These rods come in 95% and 99% purity grades. They are solid bars made from aluminum oxide ceramic. They are very hard and stable.

What exactly are high purity alumina ceramic rods? They are long, solid cylinders. They are made by pressing and firing very pure aluminum oxide powder. The result is a dense, strong ceramic bar. These rods handle extreme conditions well.

Why offer 95% and 99% purity? The purity level affects performance. The 99% rods are denser. They resist higher temperatures. They are stronger and wear less. The 95% rods are good too. They cost less. They work well where extreme purity isn’t critical. Choose based on your specific needs.

How hot can these rods get? They handle very high heat. The 95% rods work fine up to about 1600°C. The 99% rods withstand even more heat, roughly 1700°C. They don’t melt or deform easily. This makes them perfect for furnaces and high-temperature tools.

Are they electrical insulators? Yes, absolutely. Alumina ceramic is an excellent insulator. It blocks electricity very effectively. This is true even at high temperatures. This property is vital in electronics and electrical applications. It prevents short circuits.

Where are these rods typically used? You find them in many demanding places. They are used inside high-temperature kilns. They hold parts for semiconductor processing. They serve as strong, wear-resistant shafts or guides. They work well in electrical insulators and lab equipment. Their stability and purity are key advantages.

(High Purity Rod Solid 95% 99% Alumina Ceramic Rod bar Shaft)