Overview of Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick

Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick is precision-engineered from 99%+ pure aluminum oxide (Al₂O₃), offering outstanding mechanical strength and thermal stability. With a maximum operating temperature of 1800°C, these rings are widely used in high-wear applications such as bearings, seals, insulators, and semiconductor processing equipment. Their exceptional hardness and corrosion resistance make them ideal for demanding industrial environments.

Key Features of Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick

Extreme Temperature Resistance – Stable up to 1800°C with minimal thermal expansion

Superior Wear Resistance – Harder than steel, ensuring long service life

Excellent Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis, and corrosive gases

Precision Machined – Tight tolerances for consistent performance in mechanical assemblies

(Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick)

Specifications of Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick

99% alumina ceramic poles supply phenomenal performance in demanding applications. This product make-up provides impressive wear resistance. Alumina ceramic poles handle abrasive conditions extremely well. They last a lot longer than metal parts. These poles minimize devices downtime. They minimize substitute expenses significantly.

The firmness of 99% alumina ceramic is extremely high. It determines around 1500 HV on the Vickers range. This solidity straight combats rough wear. Fragments battle to scratch or erode the surface area. The product density is additionally high. It’s normally above 3.8 g/cm TWO. High density indicates less pores. Less pores indicate less surface for wear to strike. The surface area finish achievable is exceptional. Very smooth surfaces lower friction. Lower rubbing decreases wear rates much more.

These ceramic poles maintain their properties at heats. They function accurately up to 1600 ° C. Thermal stability prevents softening or degradation. This security is crucial in hot atmospheres. Alumina ceramic is also electrically shielding. It stands up to chemical strike from several acids and antacids. Chemical inertness shields the rod’s integrity. It makes certain regular performance with time.

The rods are very dimensionally secure. They withstand bending or changing shape under load. This stability is crucial for accuracy applications. They appropriate for pump shafts, bearings, guides, and insulators. Engineers select them where metal stops working rapidly. The mix of hardness, density, and chemical resistance develops an exceptional wear remedy.

(Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick)

Applications of Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick

Wear immune 99% alumina ceramic poles are extremely tough. They manage serious rubbing and abrasion very well. This makes them last much longer than steel parts in challenging conditions. They do not corrosion or wear away quickly either. Chemicals and water do not harm them. So they benefit damp locations or chemical processing. They also take care of high heat well. They remain steady and solid even at really high temperatures.

These rods are vital inside pumps. They function as plungers, pistons, and liners. Slurry pumps relocate rough combinations. The ceramic components stand up to wear much better than metal. This indicates pumps run longer without damaging down. Downtime is decreased. Maintenance costs go down.

Mechanical seals rely on these alumina rods. Seals stop leakages in spinning tools like mixers. The ceramic surface area is extremely smooth and hard. It creates a tight seal face. It puts on down really slowly. This avoids leakages and extends seal life significantly.

Bearings use alumina poles too. Standard steel bearings wear out quickly under hefty lots. Ceramic bearings are much harder. They stand up to abrasion far much better. This is vital in filthy atmospheres like mining. Devices runs smoother for longer durations.

Cutting and grinding devices need challenging products. Alumina rods work well as overviews and feed rollers. They assist rough products like sandpaper or wire. The ceramic surface withstands scratching and gouging. Device life boosts considerably. Production lines see less interruptions.

Fabric machines face continuous friction. Alumina poles function as overviews for yarn and thread. The smooth, difficult surface lessens fiber damages. Guides remain accurate much longer than steel ones. Textile top quality boosts. Device upkeep comes to be much less regular.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick

Here are 5 FAQs about Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2O3 Stick:

What makes this alumina rod so wear resistant?
This rod uses 99% pure aluminum oxide. Aluminum oxide is extremely hard. It ranks just below diamonds on the hardness scale. This high hardness directly fights abrasive wear. The material resists scratching and surface erosion extremely well. It lasts much longer than steel or other metals in abrasive conditions.

How hot can this ceramic rod get?
This rod handles very high temperatures. It works reliably up to 1650°C (3000°F). It doesn’t expand much with heat. This stable size prevents cracking under thermal stress. It works well in furnaces, kilns, and high-heat machinery.

Where do people typically use these rods?
These rods are common in tough industrial jobs. They act as guides, rollers, shafts, and bearings. They are used in textile machinery, paper processing, and chemical plants. They are also used in semiconductor tools. They are chosen anywhere sliding parts cause heavy wear.

Is the surface of this rod smooth?
Yes, the surface is very smooth. This smoothness reduces friction. Low friction means less wear on the rod itself. Low friction also means less wear on any parts touching it. This smooth finish is a natural result of the sintering process. It is ready for many precision jobs without extra polishing.

Can you make custom sizes or shapes?
Yes, custom sizes and shapes are possible. We can produce rods in different diameters and lengths. Special end shapes like flats or threads can be machined. Tell us your specific requirements. We can usually make it.

(Wear Resistance 99% Alumina Ceramic Rod Aluminum Oxide Ceramic Bar Shaft Al2o3 Stick)