Overview of Alumina Ceramic Disc for Spline Long Spindle Brass Headwork

Alumina Ceramic Disc for Spline Long Spindle Brass Headwork is precision-engineered from 99%+ pure aluminum oxide (Al₂O₃), offering exceptional mechanical strength and thermal stability. Designed to withstand temperatures up to 1800°C, these shafts provide superior performance in demanding applications including precision machinery, chemical pumps, semiconductor equipment, and high-speed bearings.

The combination of extreme hardness (9 Mohs), low friction coefficient, and excellent corrosion resistance makes alumina ceramic shafts ideal replacements for metal components in harsh environments.

Key Features of Alumina Ceramic Disc for Spline Long Spindle Brass Headwork

Ultra-High Temperature Resistance – Stable operation up to 1800°C

Exceptional Wear Resistance – 5-10x longer lifespan than steel shafts

Corrosion Proof – Resistant to acids, alkalis and solvents

Lightweight – 60% lighter than steel with higher strength

Electrical Insulation – Excellent dielectric properties

Customizable – Available in various diameters, lengths and tolerances

(Alumina Ceramic Disc for Spline Long Spindle Brass Headwork)

Specification of Alumina Ceramic Disc for Spline Long Spindle Brass Headwork

This Alumina Ceramic Disc is a key component for Spline Long Pin Brass Headwork. It manages tough jobs. It’s made from state-of-the-art alumina ceramic. This material is very tough. Hard stuff resists wear well. This disc sees hefty friction. It stands up far better than softer products. It lasts much longer.

The disc goes exactly on the spindle shaft. It works as a wear surface. It shields the brass headwork parts. Brass is softer. Without this disc, the brass would wear down quickly. The disc takes the friction. This maintains the brass working right. It stops leaks as well. The smooth ceramic surface area makes a tight seal.

It handles high warmth conveniently. Alumina ceramic does not mind warm atmospheres. This is important near spindles. Spindles get hot during job. The disc stays secure. It will not warp or fracture from the warm. This maintains everything running smoothly.

We make it exactly. Precise measurements are critical. It should fit the spindle completely. Normal dimensions are 25mm OD, 15mm ID, and 5mm thick. Other sizes are possible. We can match your pin specifications. Simply tell us the dimensions you need.

The surface finish is very smooth. We polish it finely. A smooth surface lowers friction a lot more. It likewise makes sealing better. This improves the whole headwork performance. The disc is likewise extremely strong. Alumina ceramic has high compressive strength. It will not crush under heavy spindle tons.

Setup is basic. Move it onto the pin shaft. It sits in its assigned place. Ensure it’s seated level. Proper installment avoids very early failure. Manage it thoroughly before suitable. Ceramic is difficult but can chip if struck hard. Stay clear of sharp effects.

(Alumina Ceramic Disc for Spline Long Spindle Brass Headwork)

Applications of Alumina Ceramic Disc for Spline Long Spindle Brass Headwork

Alumina ceramic discs work well in spline long spindle brass headwork. These discs are very hard. They stand up to put on better than metal components. Brass headwork includes fast rotating pins. Rubbing occurs constantly. This friction uses parts down swiftly. Alumina ceramic manages this friction much better. It lasts a lot longer than other products.

Warm is a big trouble in these spindles. The rotating produces heats. Alumina ceramic manages warmth exceptionally well. It does not warp or deteriorate under high warmth. This maintains the pin running efficiently. It protects against unforeseen failures. Downtime expenses money. These discs help avoid that.

These ceramic discs supply a steady surface. The spline pin requires precision. Any kind of wobble or use reasons issues. The alumina disc preserves its shape completely. It ensures the spindle remains lined up. This leads to much better item top quality. It likewise protects various other spindle components.

Chemical resistance matters as well. Brass headwork frequently uses oils or coolants. Alumina ceramic does not respond with these chemicals. It remains solid. Steel components might rust over time. The ceramic disc prevents this concern. It requires much less maintenance. This conserves effort and time.

Installment is normally straightforward. The disc fits onto the spindle shaft. Its smooth surface lowers rubbing quickly. This decreases the energy needed to rotate the spindle. Power expenses decrease. The equipment runs a lot more efficiently.

The discs are very strong. They endure hefty lots. Brass headwork can be demanding. The ceramic disc takes care of the pressure. It does not split conveniently. This strength is important for lasting use. Replacing components too often is expensive. Alumina ceramic expands service life substantially. It maintains the headwork running accurately day in day out.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Alumina Ceramic Disc for Spline Long Spindle Brass Headwork

Here are 5 FAQs about Alumina Ceramic Discs for Spline Long Spindle Brass Headwork:

What is this alumina ceramic disc for? This disc protects the brass headwork on your spline long spindle. The spindle spins very fast. The disc takes the wear. The brass parts stay safe. This saves money on replacements.

Why use alumina ceramic specifically? Alumina ceramic is naturally super hard. It resists abrasion incredibly well. Metal parts wear down much faster. The ceramic disc lasts way longer. This means less downtime for maintenance.

What’s the main benefit? The biggest benefit is reduced wear on the brass headwork. The ceramic disc absorbs the friction. The expensive brass components don’t grind down. This makes parts last longer. You save money over time.

How is the disc installed? Installation is straightforward. The disc fits directly onto the spline spindle shaft. It sits between the spinning spindle and the brass head. Proper alignment is important. Ensure it sits flat against the brass surface.

What sizes are available? These discs come in standard sizes matching common spline spindle diameters. Check your spindle specs. Match the inner diameter (ID) and outer diameter (OD) exactly. The thickness is usually standard. No extra tools needed.

(Alumina Ceramic Disc for Spline Long Spindle Brass Headwork)