Overview of Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates

Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates is advanced ceramic components made from high-purity aluminum oxide (Al₂O₃), known for their exceptional hardness, thermal stability, and corrosion resistance. These plates are widely used in demanding industries such as electronics, aerospace, semiconductor manufacturing, and high-temperature furnace applications due to their superior electrical insulation and wear-resistant properties.

Key Features of Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates

High Thermal Resistance ：Withstands extreme temperatures up to 1600°C.

Excellent Electrical Insulation：Ideal for electronic substrates & insulators.

Superior Mechanical Strength：High hardness & wear resistance for long-lasting performance.

Chemical & Corrosion Resistance：Resists acids, alkalis, and harsh environments.

Customizable：Available in various sizes, thicknesses, and purity levels (96%-99.9%).

(Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates)

Specification of Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates

Factory Whole Tactical Armor Plates are essential protective gear. These plates fit inside special panel vests. The plates provide critical ballistic protection. They are designed to stop bullets effectively. Alumina ceramic is the main material used. This ceramic material is very hard. It offers strong resistance against impacts.

These plates come in different protection levels. Level III plates stop common rifle rounds. Think of threats like 7.62x39mm. Level IV plates offer even higher protection. They can stop armor-piercing rifle rounds. Think of threats like .30-06 AP M2. Both levels meet strict testing standards. NIJ standards are followed for certification.

The plates are shaped to fit standard carrier panels. You slide them into the vest’s pockets. This setup covers the front and back vital areas. Flank armor pieces are also available. Flank plates protect your sides. They shield areas not covered by the main plates. Waist plates offer lower torso protection. They guard against threats from lower angles. You can combine these pieces for full coverage.

The alumina ceramic core is crucial. It shatters incoming bullets on impact. A strong backing layer catches fragments. This backing is usually polyethylene or similar. The combination works well. It keeps you safe from penetration. The plates are durable. They maintain protection over time. They resist cracking under stress.

Weight is always a consideration. Ceramic plates are lighter than steel plates. This makes movement easier. Comfort improves during extended wear. The profile is relatively thin. It doesn’t add excessive bulk. You can wear these plates for longer periods. They are reliable protection for demanding situations.

(Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates)

Applications of Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates

Factory whole tactical armor plates go into panel vests. These plates protect the chest. Flank armor waist plates protect the sides. This setup gives full coverage. These plates meet Level III or Level IV standards. Level III stops many rifle bullets. Level IV stops even more powerful rifle threats. They are made from alumina ceramic. Alumina ceramic is very hard. It shatters bullets on impact. This material is strong. It is also lighter than steel plates. Lighter weight means less strain on the user. Soldiers wear these plates. Police officers wear them. Security personnel wear them. Anyone facing ballistic threats uses them. The plates fit into special carriers. The carriers hold them securely. The carriers are usually made from tough fabric. They are designed for comfort. Comfort matters for long wear times. Flank plates add essential side protection. Chest plates alone leave sides exposed. Waist plates fix that problem. Alumina ceramic handles multiple hits well. It breaks the bullet. It absorbs the energy. The plate itself might crack. But it still stops the round. Reliability is crucial in life-threatening situations. Users need dependable gear. These plates provide that confidence. They are a core part of modern body armor systems. Military units issue them. Law enforcement agencies issue them. They are standard equipment for high-risk duties. The factory makes them ready to use. Users just insert them into their vest carriers. It is a simple process. Protection starts immediately.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates

Factory Whole Tactical Armor Plates are protective panels you insert into special vests. These vests hold the plates securely over vital areas like your chest and back. Flank armor and waist plates protect the sides of your torso and your lower back. The plates themselves are made from Alumina Ceramic. This is a strong ceramic material. People often have questions about these plates.

What exactly are Factory Whole Tactical Armor Plates? They are solid protective panels. You insert them into panel vests. They cover your front and back. Flank armor pieces protect your sides. Waist plates cover your lower back area. Together, these plates create a protective shield around your torso.

How do these armor plates work? They absorb the impact when a bullet or shrapnel hits them. The hard ceramic material breaks apart the projectile. The energy spreads out. This action stops the threat from penetrating through to your body. The plates absorb the energy. They protect you.

What threats do these III and IV plates stop? Level III plates stop common rifle rounds like 7.62x39mm. Level IV plates stop even more powerful rifle threats. This includes armor-piercing rounds like .30-06 M2 AP. Both levels meet strict NIJ safety standards. They are tested rigorously.

Are these Alumina Ceramic plates heavy? Compared to steel plates, Alumina Ceramic is lighter. This makes the armor more comfortable to wear for longer periods. You can move better. The lighter weight reduces strain. It improves mobility.

How should I care for my ceramic armor plates? Handle them carefully. Avoid dropping them. Even small cracks can weaken the plate. Store them flat in a cool, dry place. Check them regularly for damage. Damaged plates might not work right. Replace them if you find cracks or deep chips.

(Factory Whole Tactical armor Plates Inserted Into Panel Vests Flank armor Waist Plates III IV Alumina Ceramic Plates)