Overview of High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate

High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate is advanced ceramic components made from high-purity aluminum oxide (Al₂O₃), known for their exceptional hardness, thermal stability, and corrosion resistance. These plates are widely used in demanding industries such as electronics, aerospace, semiconductor manufacturing, and high-temperature furnace applications due to their superior electrical insulation and wear-resistant properties.

Key Features of High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate

High Thermal Resistance ：Withstands extreme temperatures up to 1600°C.

Excellent Electrical Insulation：Ideal for electronic substrates & insulators.

Superior Mechanical Strength：High hardness & wear resistance for long-lasting performance.

Chemical & Corrosion Resistance：Resists acids, alkalis, and harsh environments.

Customizable：Available in various sizes, thicknesses, and purity levels (96%-99.9%).

(High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate)

Specification of High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate

This wear liner panel solves hard troubles in heavy market. Equipment takes consistent abuse from rocks, ores, and various other harsh materials. Effect shatters breakable products. Abrasion uses surfaces down quickly. This composite panel takes care of both. It combines the best attributes of various materials.

The core makes use of high alumina ceramic. This ceramic is incredibly tough. It gauges over 85 HRA. It resists scraping and gouging extremely well. Rough materials slide over it triggering minimal wear. The ceramic comes as blocks or tiles. These are firmly installed into a difficult steel backing plate. The steel supplies strong structural support. It soaks up hefty impacts without damaging. It manages the mechanical tons. Screws or welding affix the steel plate to your devices framework.

Some layouts add a third layer. Rubber rests in between the ceramic and the steel. This rubber layer adds additional advantages. It soaks up shock and vibration. It decreases sound significantly. It helps cushion impacts protecting both the ceramic and the steel base. This makes the entire system last also much longer under punishing conditions. We call this the ‘three-in-one’ alternative.

This composite approach is wise. Each material does what it does finest. The ceramic quits abrasion. The steel takes the hits and holds everything together. The optional rubber moistens vibrations. With each other, they develop a barrier a lot more powerful than any single product. You get much longer service life. You lower expensive downtime for substitutes. Upkeep ends up being much easier. You save cash with time.

These panels fit many applications. Use them in chutes, receptacles, shelters, and transfer factors. They protect anywhere materials slide, decline, or influence surfaces. Installation is straightforward. Bolt or bonded the steel support plate firmly. The panels interlock for complete protection. They create a continuous, smooth surface area. Material circulation improves. Blockages lower. The surface stays smooth much longer.

(High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate)

Applications of High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate

Hefty machinery deals with consistent wear. Tools breaks down quickly. This triggers pricey downtime. Fix expenses accumulate swiftly. Manufacturing slows down. It’s a large issue in mining, nuclear power plant, cement factories. Products handling is tough on machines. Abrasion ruins parts. Influence shatters weaker products. Finding a good lining is hard. Our service is a special composite plate. It incorporates the very best products. High alumina ceramic, strong steel, and often hard rubber interact. This develops an extremely wear-resistant lining panel. Think about it as 2 or 3 guards in one.

The ceramic layer is essential. Alumina ceramic is extremely hard. Practically nothing scratches it. Unpleasant products slide right over it. This surface takes the straight hit from wear. Underneath rests thick, long lasting steel. This steel plate provides the entire point stamina. It handles heavy effects. It soaks up shock. It holds the ceramic securely. The steel prevents breaking. It quits the ceramic from breaking. The optional rubber layer adds an additional benefit. Rubber absorbs resonance. It decreases sound considerably. It aids wet big impacts better. This safeguards the maker framework itself.

This mix defeats single materials. Steel alone wears down quickly under abrasion. Rubber alone splits quickly. Ceramic alone can crack from impact. Our composite uses each product where it functions ideal. The difficult ceramic surface resists scratching. The challenging steel support stops damage. The rubber layer silences points down. You obtain a lining that lasts a lot longer. It endures severe penalty. It deals with hefty, sharp, abrasive lots day after day.

These plates are used in numerous places. They line chutes where rocks and ore loss. They safeguard hoppers holding abrasive materials. They are superb for crusher feed plates. They work well in conveyor transfer points. They are best for mixer linings. Anywhere heavy, sharp products relocate, these panels aid. They lowered replacement stops. They save money on extra parts. They maintain machines running longer. You need less upkeep. Your production keeps up.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate

What exactly is this composite liner plate?
It combines materials. High alumina ceramic tiles bond onto a steel or rubber backing plate. Some plates use all three layers. This creates a tough wear-resistant surface.

Why use a composite instead of just steel or just ceramic?
Each material fights wear differently. Steel handles big impacts well. Ceramic resists constant scratching and abrasion superbly. Rubber absorbs shock and noise. Together they cover more damage types. This gives better overall protection. It lasts longer than single-material liners.

How do the ceramic tiles stay attached?
Strong epoxy adhesive bonds the tiles to the backing plate. Steel plates often have welded studs too. The tiles lock onto these studs. Rubber plates use special vulcanization bonding. This double fixing method is very secure. Tiles won’t fall off under heavy use.

Where are these liner plates typically used?
They go in equipment exposed to severe wear. Think mining chutes, hoppers, and conveyor transfer points. Power plant coal handling systems use them. Cement plant raw mills and crushers need them. Anywhere abrasive materials slide or impact surfaces benefits.

How are the plates installed?
It’s straightforward. Bolt the plates directly onto the existing structure. Steel backing plates weld onto support beams. Rubber-backed plates bolt on. The bolts go through holes in the backing plate. The ceramic surface faces the wear area. This creates a protective barrier.

(High Alumina Ceramic and Steel (and Rubber) Two or Three in One Composite Wear Resistant Liner Panel Plate)