Overview of Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate

Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate is advanced ceramic components made from high-purity aluminum oxide (Al₂O₃), known for their exceptional hardness, thermal stability, and corrosion resistance. These plates are widely used in demanding industries such as electronics, aerospace, semiconductor manufacturing, and high-temperature furnace applications due to their superior electrical insulation and wear-resistant properties.

Key Features of Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate

High Thermal Resistance ：Withstands extreme temperatures up to 1600°C.

Excellent Electrical Insulation：Ideal for electronic substrates & insulators.

Superior Mechanical Strength：High hardness & wear resistance for long-lasting performance.

Chemical & Corrosion Resistance：Resists acids, alkalis, and harsh environments.

Customizable：Available in various sizes, thicknesses, and purity levels (96%-99.9%).

(Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate)

Specification of Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate

Below are the specs for our Stand Alone ICW Porcelain Hard Plates. These plates quit bullets on their own. They do not need extra soft shield support. Our plates meet Level IIIA, Level III, and Degree IV ballistic criteria. They stop common handgun rounds, rifle rounds like the 7.62 mm NATO, and even armor-piercing rifle dangers.

We utilize advanced ceramic products. The primary options are Aluminium Oxide (Alumina) and Silicon Carbide. Both products are extremely hard. This firmness separates bullets on impact. The ceramic face is bonded to a difficult support product. This support captures bullet pieces. The backing is usually polyethylene (PE). This mix gives high defense with less weight than old steel plates.

You can pick home plate form. We offer flat plates. We also offer curved plates. Single curve plates bend a little side to side. They fit the torso much better. Dual contour layers bend both side to side and top to base. This form fits the body contour much better. Both bent alternatives enhance convenience and wearability under equipment.

Plate density depends upon the material and security level. Level IV plates are thicker than Level III plates. Typically, plates vary from concerning 20mm to 35mm thick. Weight also varies. Alumina plates are usually much heavier. Silicon Carbide plates are lighter yet cost even more. Anticipate a common Level IV plate to weigh between 4.5 and 7 extra pounds. Specific dimensions are offered. Common dimensions are 10″ x 12″ and shooter’s cut.

The front surface has a durable, spall-resistant finishing. This stops ceramic pieces from flying back. The back has a soft padding layer. This extra padding makes the plate extra comfortable versus the body. All plates undertake strict quality assurance. Every batch is examined versus the called for NIJ requirements. This makes sure dependable efficiency.

(Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate)

Applications of Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate

These armor plates quit bullets. They are ceramic plates for body armor. You can utilize them alone or with other shield. They are available in protection levels IIIA, III, and IV. Degree IIIA stops handgun rounds. Level III quits rifle rounds like 7.62 mm. Level IV stops armor-piercing rifle rounds. The front is hard ceramic. It breaks the bullet on impact. The back is soft PE plastic. This catches fragments. This keeps you safer. Two ceramic kinds are used. Alumina oxide is common. Silicon carbide is lighter and tougher. Both work well. Plates come level or bent. Single contour flexes side to side. This fits your breast much better. Dual contour bends side to side and top to bottom. This fits your torso shape best. The far better fit improves comfort. It also helps the plate function right. These plates are for severe security. Authorities utilize them. Armed forces devices use them. Security teams use them. Civilians use them where permitted. They quit high-powered dangers. The ceramic face absorbs the bullet hit. The PE support holds everything with each other. Bent plates relocate with you. This is important throughout activity. Level plates are cheaper. Rounded plates fit better. Choose the curve based on requirement. The materials issue for weight and defense. Alumina is affordable. Silicon carbide uses top efficiency. The security level have to match expected hazards. Degree IV quits the most effective rifle rounds. Degree III quits typical rifles. Degree IIIA quits handguns. Constantly check regional regulations. Appropriate fit is essential for safety.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate

Here are the 5 FAQs about the Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate:

What protection levels does this plate offer?
This plate is stand-alone. It stops bullets rated at NIJ Levels IIIA, III, and IV by itself. You don’t need extra soft armor behind it for these threats. It handles common rifle rounds and high-velocity handgun rounds directly.

What materials is the plate made from?
The front strike face uses ceramic. This ceramic is either Aluminium Oxide (Alumina) or Silicon Carbide. The back layer is Polyethylene (PE). This combination breaks bullets apart on impact. The PE layer catches fragments. It provides strong multi-hit protection.

What curve options are available?
The plate comes in two shapes. Choose a Single Curve shape. It curves side-to-side for basic torso fit. Or choose a Double Curve shape. It curves both side-to-side and top-to-bottom. The Double Curve fits the body’s natural contours much better. This improves comfort during wear.

How thick and heavy is it?
Thickness and weight depend on the size and curve you pick. They also depend on the specific ceramic material used. Silicon Carbide plates are usually thinner and lighter than Aluminium Oxide plates for the same protection level. Expect a weight range. It’s generally between 5.5 lbs and 8 lbs for a standard 10×12 inch plate. This offers a good balance between protection and mobility.

Is this plate really stand-alone for all levels?
Yes. This plate is certified as stand-alone for Levels IIIA, III, and IV. It meets the NIJ standard requirements without needing a soft armor backer. It provides the stated protection by itself. You can use it alone in a plate carrier.

(Stand Alone ICW IIIA III IV Ceramic Full Pe Aluminium Oxide Alumina Silicon Carbide Plate Single Curve Double Curve Hard Plate)