Overview of 350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N

350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N is precision-manufactured from 99% aluminum oxide (Al₂O₃), delivering exceptional thermal stability and mechanical properties. These rods maintain structural integrity in extreme environments up to 1800°C, making them perfect for demanding industrial and research applications.

With outstanding resistance to wear, corrosion and thermal shock, alumina rods are widely used in high-temperature fixtures, sensor components, semiconductor equipment, and laboratory apparatus.

Key Features of 350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N

Extreme Temperature Resistance – Continuous operation up to 1800°C

Superior Mechanical Strength – High hardness and wear resistance

Excellent Thermal Shock Resistance – Withstands rapid temperature changes

Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis and corrosive environments

Precision Dimensions – Tight tolerances for critical applications

(350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N)

Specification of 350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N

This ceramic igniter resistor creates the heat needed to start your wood pellet stove, burner, or boiler. It works reliably at both 120 volts and 230 volts. This makes it suitable for many different heating systems. You need a 350-watt resistor. This specific igniter handles that power level well. The ceramic material is key. It heats up fast and gets very hot. This heat ignites the pellet fuel quickly. Fast ignition means your heater starts working sooner. You waste less fuel waiting. The resistor is built to last. It handles high temperatures constantly. It resists cracking or breaking down over time. This durability is important. Replacements are inconvenient and cost money. This igniter fits common air heaters and hydro (water) heaters too. It is often labeled as N type. Check your appliance’s manual. Make sure this model matches your requirements. The electrical resistance is set correctly. This ensures the igniter draws the right power. Incorrect resistance causes problems. It might not get hot enough. It could overheat and fail early. Proper installation matters. Put it in the right spot. Secure the electrical connections tightly. Loose connections cause heat and failure. A good igniter means dependable starts. You avoid frustrating ignition failures. This component keeps your heating system running smoothly.

(350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N)

Applications of 350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N

This ceramic igniter resistor makes starting fires easier. It’s made for pellet stoves, burners, and boilers. You plug it in. It gets very hot very fast. This heat lights the fuel pellets automatically. No need for manual lighting. It’s reliable.

It works with different power systems. It handles 120 volts common in homes. It also works with 230 volts used in many appliances. This flexibility is good. You can use it in various heaters.

The design is important. It uses ceramic material. Ceramic handles high temperatures well. It lasts longer than metal parts. It heats up quickly. It cools down quickly too. This makes it efficient.

You find this igniter in many heating systems. It starts wood pellet stoves reliably. It ignites burners in boilers. It works well in air heaters. It performs in hydro heaters. It’s a key part for automatic ignition.

The power rating is 350 watts. This is strong enough for most jobs. It provides the intense heat needed to start combustion. It ensures your heater starts when you need it. It helps keep your home warm.

Durability matters. The ceramic construction resists wear. It handles repeated heating and cooling cycles. It won’t crack easily. It provides consistent performance over time. You get good value.

Replacing a faulty igniter? This one is a solid choice. Installing it correctly is key. Follow the manufacturer instructions. Ensure proper voltage supply. It will work well for seasons.

It simplifies heating system operation. You get dependable ignition. It reduces manual effort. It contributes to a comfortable home. It’s a practical component for modern heaters.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N

What voltage works with this igniter?

This igniter runs on either 120 volts or 230 volts. You don’t need a different part for different systems. It works with both standard household voltages found in appliances.

How do I install this igniter?

Installing it needs care. Make sure the power is off first. Connect the wires correctly following your appliance’s wiring diagram. Wrong wiring can break the igniter or cause other problems. Always check the instructions for your specific stove or boiler.

How long does this igniter last?

The lifespan varies. It depends on how often you use it and the conditions inside your appliance. It usually lasts a long time. But, like any part, it can wear out eventually. Replacing it is normal maintenance.

Why might my igniter stop working?

Several things can happen. The ceramic part can crack. This often happens from physical damage or sudden temperature changes. The wires or connections can also fail. Check for cracks or broken wires if it doesn’t heat up.

Is this the right replacement for my pellet stove igniter?

Yes. This igniter is a common replacement part. It fits many wood pellet stoves, burners, and boilers. It also works in air heaters and hydro heaters needing a 350-watt ceramic resistor igniter. Check your old part’s specs to be sure.

(350W Ceramic Igniter Resistance 120V 230V for Wood Pellet Stove, burner and Boiler Ceramic Resistor for Air and Hydro Heater N)