Overview of Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant

Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant is precision-manufactured from 99% aluminum oxide (Al₂O₃), delivering exceptional thermal stability and mechanical properties. These rods maintain structural integrity in extreme environments up to 1800°C, making them perfect for demanding industrial and research applications.

With outstanding resistance to wear, corrosion and thermal shock, alumina rods are widely used in high-temperature fixtures, sensor components, semiconductor equipment, and laboratory apparatus.

Key Features of Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant

Extreme Temperature Resistance – Continuous operation up to 1800°C

Superior Mechanical Strength – High hardness and wear resistance

Excellent Thermal Shock Resistance – Withstands rapid temperature changes

Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis and corrosive environments

Precision Dimensions – Tight tolerances for critical applications

(Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant)

Specification of Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant

These custom ceramic rods mix alumina and zirconia for extreme resilience. You require components that stand up to constant damage. This material provides a powerful service. Its hardness surpasses HRA 85, making it very resistant to abrasion. Believe sand, grit, or harsh materials gliding against it. The surface area stays smoother longer. This directly prolongs the part’s usable life.

Zirconia adds crucial strength to the alumina base. Alumina is really tough however can be weak alone. Including zirconia dramatically enhances crack resistance. The pole can soak up effects much better. It deals with unexpected shocks without splitting. This sturdiness is important in demanding commercial settings.

We regulate the production process securely. The result is a thick, near-zero porosity framework. Minimal pores mean superior strength. It also prevents corrosive fluids or gases from seeping inside. This shields the pole from chemical assault. You obtain reputable efficiency even in extreme chemical atmospheres.

The product maintains its stamina at heats. It carries out well up to 1500 ° C. This matches applications including warmth like heating system components. Its electrical insulation residential properties are excellent. This serves for digital parts or isolating parts.

We make these poles to your specific needs. Define the size and length you require. We cut precise measurements. We can also tailor the alumina-zirconia mix proportion. This enhances the balance between solidity and sturdiness for your particular task. Inform us your application difficulties.

These rods are excellent for extreme wear scenarios. Utilize them as overviews, shafts, or bushings in hefty equipment. They work well as nozzles blasting unpleasant media. They serve as liners protecting devices from continuous friction. They work as protecting aspects in high-heat electrical systems. They do accurately as reducing tool parts.

(Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant)

Applications of Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant

Personalized alumina zirconia ceramic rods provide severe firmness. They stand up to wear in difficult commercial settings. These ceramic bars blend aluminum oxide and zirconium oxide powders. The mix produces a super-hard product. It outlasts steel and numerous steels. Alumina brings excellent solidity. Zirconia includes stamina and durability. This combination functions well. The poles manage severe friction and abrasion daily. They stand up to consistent massaging and scraping. Components last a lot longer. Manufacturing downtime decreases.

These ceramic poles perform in high warm. They maintain their shape and strength at intense temperature levels. Heater parts and kiln furnishings benefit. Thermal shock is not a large problem. The poles warm up and cool down without splitting conveniently. This reliability issues in rapid temperature changes.

Many markets utilize these custom-made rods. Cutting tools gain extended life. Fabric guides make it through rough threads longer. Pump parts stand up to slurry disintegration much better. Shutoff seats seal tighter under stress. Mechanical seals run smoother. Semiconductor handling devices stay clear of particle contamination. Wear plates in equipment require much less replacement. Grinding media keep sharp edges. Dimension tools stay precise.

The firmness is very high. Rockwell C 90+ prevails. This hardness stops scratches and surface damage. Put on rates go down considerably. Maintenance costs fall. Devices runs much longer in between fixings. Power use may lower due to lower rubbing. Lubes are often unnecessary.

These poles are personalized. Diameters and lengths match certain demands. Tolerances are exact for precise fits. Surface surfaces are really smooth. This minimizes friction even more. Designers pick these rods for vital wear points. They resolve problems where metal components fail prematurely. The investment pays off promptly. Less downtime means more output.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.(nanotrun@yahoo.com)

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant

What makes these rods so hard?
Alumina and zirconia ceramics are extremely hard materials. Alumina reaches about 1500 HV on the Vickers scale. Zirconia is even tougher, often over 1200 HV. This is much harder than most metals. Hardness directly fights wear.

Why are they good for wear resistance?
Hardness stops abrasion. These ceramics don’t scratch or erode easily. They handle constant friction well. This is vital in tough spots like pump seals, cutting tools, and bearing sleeves. They last longer than metal parts in abrasive conditions.

Can I get specific sizes and shapes?
Yes, customization is standard. We make rods to your exact needs. Tell us the diameter and length you require. We work with diameters from 1mm to 50mm or more. Lengths can be cut precisely. Special end shapes or features are possible too.

How well do they handle heat?
Very well. Alumina rods resist temperatures near 1600°C. Zirconia handles slightly lower but still very high heat, around 1400°C. They won’t melt or deform like plastics. They won’t oxidize like metals. This makes them ideal for furnace parts or high-temperature sensors.

What about the surface finish?
We provide different finishes. You can get a standard machined surface. You can request a polished finish for less friction. A very fine grind is also available. The finish depends on your application needs. Smoother finishes reduce wear in moving parts.

(Custom Al2o3 Alumina Zro2 Zirconia Ceramic Rod Bar for High Hardness Wear Resistant)