Overview of Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire

Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire is precision-manufactured from 99% aluminum oxide (Al₂O₃), delivering exceptional thermal stability and mechanical properties. These rods maintain structural integrity in extreme environments up to 1800°C, making them perfect for demanding industrial and research applications.

With outstanding resistance to wear, corrosion and thermal shock, alumina rods are widely used in high-temperature fixtures, sensor components, semiconductor equipment, and laboratory apparatus.

Key Features of Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire

Extreme Temperature Resistance – Continuous operation up to 1800°C

Superior Mechanical Strength – High hardness and wear resistance

Excellent Thermal Shock Resistance – Withstands rapid temperature changes

Electrical Insulation – High dielectric strength for electronic applications

Chemical Inertness – Resists acids, alkalis and corrosive environments

Precision Dimensions – Tight tolerances for critical applications

(Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire)

Specification of Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire

This factory glazed ceramic spark plug ignition needle works for burner electrodes needing a wire connection. The main body is a high-grade ceramic insulator. This insulator gets a special factory glaze coating. The glaze makes the ceramic very hard. It protects against moisture and chemicals. The glaze also helps prevent electrical tracking on the surface. Electrical tracking can cause misfires.

The ignition needle sticks out from one end of the ceramic body. This needle is made from a strong, heat-resistant alloy. It withstands the intense heat inside the burner. The needle provides the sharp point for the spark. Sparks jump from this needle tip to the burner electrode. The burner electrode is usually the grounded part nearby.

A wire connects to the other end of the ceramic unit. This wire carries the high voltage needed for sparking. The wire attachment point is secure. It uses a crimped metal terminal embedded in the ceramic. This connection is solid. It won’t loosen easily from vibration or heat cycling.

The overall size is compact. Typical lengths range from 80mm to 150mm. Common diameters for the ceramic part are 8mm or 10mm. The ignition needle length varies based on the burner design. It must reach the correct spark gap position.

The ceramic material handles very high voltages. It insulates reliably under tough conditions. The metal parts resist corrosion. They don’t rust easily. The unit performs well in high-temperature environments. It maintains spark strength over long periods. This component is a dependable part for ignition systems.

(Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire)

Applications of Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire

This factory glazed ceramic spark plug ignition needle is built for burner electrodes needing a wire connection. It gives a reliable spark to start combustion in burners. The core uses a tough ceramic material. This ceramic body gets a special glazing treatment at the factory. The glazing seals the ceramic surface. This sealing makes the needle highly resistant to harsh conditions. Heat, moisture, and chemicals won’t easily damage it. A metal wire attaches directly to the ceramic needle. This wire connects the ignition needle to the burner’s power source. This creates the spark.

The ceramic construction offers big advantages over older metal electrodes. Ceramic handles intense heat much better. It won’t warp or melt like metal can. It also resists corrosion and spark erosion far longer. This means the ignition needle lasts much longer. You get a more dependable spark over time. Consistent ignition is crucial for burner efficiency and safety. A weak or missing spark causes ignition failure. This leads to wasted fuel or unsafe conditions. This ceramic ignition needle provides a strong, reliable spark consistently.

These ignition needles are used in many burner systems needing a wire connection. You find them in industrial heaters, large boilers, and commercial ovens. They work well in gas-powered equipment like furnaces and kilns. They are also common in certain types of engines using burners. Any application needing a dependable spark source in a hot, demanding environment can benefit. The factory glazing ensures the ceramic stays protected right from the start. This minimizes early failures.

The key benefit is greatly improved lifespan and reliability. Burner operators face fewer ignition problems. Downtime for electrode replacement drops significantly. Maintenance costs go down. You get stable burner operation. This translates to better fuel efficiency and fewer operational headaches. The ceramic needle withstands the tough life inside a hot burner. It keeps sparking reliably day after day.

Company Profile

Alumina Technology Co., Ltd,. We focus on the research and development, production and sales of alumina products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2005, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.

Our products includes but not limited to Alumina Boat, Alumina Crucible, Alumina Dish, Alumina Foam Filter, Alumina Plate, Alumina Rod, Alumina Bar, Alumina Balls, Filter Alumina, Nano Alumina Powder, Spherical Alumina Powder, ect. please feel free to contact us.([email protected])

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire

What does this ignition needle do?
This factory glazed ceramic spark plug ignition needle creates a spark. It lights the fuel in your burner. It sits near the burner electrode. The spark jumps from the needle to the electrode. This starts the burner. It provides reliable ignition every time.

Why is it made from ceramic?
Ceramic handles extreme heat near the burner. Other materials might melt or crack. Ceramic stays strong. The factory glaze adds a protective layer. This glaze stops dirt buildup. It keeps the spark strong. Ceramic also doesn’t conduct electricity. This is important for safety.

How long does this ignition needle last?
These ceramic ignition needles last a long time. They resist high temperatures well. The glazed surface protects against corrosion. It handles burner environments effectively. Proper installation helps its lifespan. It needs less replacement than other types. This saves time and money.

Will it work with my existing burner?
This ignition needle fits standard burners. It connects to common ignition wires. Check your burner model before buying. Match the specifications carefully. The wire attachment is straightforward. It usually replaces old needles easily. Verify the size and voltage.

How do I install it correctly?
Turn off the power to the burner first. Safety is important. Remove the old ignition needle carefully. Install the new needle securely. Connect the wire tightly. Ensure the spark gap is correct. Follow your burner manual. Check the spark after installation. Proper installation prevents problems.

(Factory Glazed Ceramic Spark Plug Ignition Needle for Burner Electrode with Wire)